Vruddhi Engineering Works Limited

Rebar couplers  are suitable for joining reinforcement bars end to end. They are an efficient and cost effective alternative for overlapping joints. 

 

Vruddhi Couplers are readily available for rebar sizes 16 mm to 40 mm. 

 

      Advantages of Vruddhi Couplers

1. Saves cost by reducing steel wastage
2. Saves time
3. Better UTS than that of parent Rebar
4. Solves problem of bar congestion
5. No Torque wrench required 

 

Build a greener and lighter structure by reducing consumption of steel. 

They are designed for connecting Reinforcement bars. These couplers are parallel threaded mechanical splicing system. This system is cost-effective and efficient solution instead of overlapping joints.

We offer parallel threaded couplers that are IS 16172 standard compliant. These couplers are easy and quick to install and saves construction time. These couplers are also best solution to the congestion of the bars. We offer quality threading services on-site, so you can install them easily.

 

 

Product Features

Cost Saving and Time Saving 

IS 16172:2014 standards compliant

Manufactured from EN8D Material

Best alternative to lap splicing

Load Transfer is independent of the grade of concrete

Available in sizes from 16mm to 40mm

Build a “Greener” and a “Lighter” structure by reducing the consumption of steel. 

We are manufacturer and supplier of cold forged couplers. Type 2 parallel threaded couplers are a great solution for connecting TMT bars for structural integrity. They offer great performance when subjected to tension, compression, stress cycles and fatigue cycles. In this method, the reinforcement bars are forged and then they are threaded. 

Our Cold forged couplers are compliant with IS 16172 standards and manufactured using EN8D material. While using this type of coupler Cross-section area of the bar is not reduced and it makes strong structure. We offer quality threading services on-site,  so you can install them easily.

 

 

Product Features

Saves cost and time in construction

IS 16172:2014 standards compliant

Manufactured from EN8D Material

Vruddhi Couplers improve concrete flow 

Minimum 625 Mpa of Ultimate Tensile Strength is achieved 

Available in sizes from 16mm to 40mm

Facilitate a “Greener” and a “Lighter” structure by reducing the consumption of steel

We are manufacturer and supplier of cold forged couplers. Type 2 parallel threaded couplers are a great solution for connecting TMT bars for structural integrity. They offer great performance when subjected to tension, compression, stress cycles and fatigue cycles. In this method, the reinforcement bars are forged and then they are threaded. 

Our Cold forged couplers are compliant with IS 16172 standards and manufactured using EN8D material. While using this type of coupler Cross-section area of the bar is not reduced and it makes strong structure. We offer quality threading services on-site,  so you can install them easily.

 

 

Product Features

Saves cost and time in construction

IS 16172:2014 standards compliant

Manufactured from EN8D Material

Vruddhi Couplers improve concrete flow 

Minimum 625 Mpa of Ultimate Tensile Strength is achieved 

Available in sizes from 16mm to 40mm

Facilitate a “Greener” and a “Lighter” structure by reducing the consumption of steel

We are manufacturer and supplier of cold forged couplers. Type 2 parallel threaded couplers are a great solution for connecting TMT bars for structural integrity. They offer great performance when subjected to tension, compression, stress cycles and fatigue cycles. In this method, the reinforcement bars are forged and then they are threaded. 

Our Cold forged couplers are compliant with IS 16172 standards and manufactured using EN8D material. While using this type of coupler Cross-section area of the bar is not reduced and it makes strong structure. We offer quality threading services on-site,  so you can install them easily.

 

 

Product Features

Saves cost and time in construction

IS 16172:2014 standards compliant

Manufactured from EN8D Material

Vruddhi Couplers improve concrete flow 

Minimum 625 Mpa of Ultimate Tensile Strength is achieved 

Available in sizes from 16mm to 40mm

Facilitate a “Greener” and a “Lighter” structure by reducing the consumption of steel

We are manufacturer and supplier of cold forged couplers. Type 2 parallel threaded couplers are a great solution for connecting TMT bars for structural integrity. They offer great performance when subjected to tension, compression, stress cycles and fatigue cycles. In this method, the reinforcement bars are forged and then they are threaded. 

Our Cold forged couplers are compliant with IS 16172 standards and manufactured using EN8D material. While using this type of coupler Cross-section area of the bar is not reduced and it makes strong structure. We offer quality threading services on-site,  so you can install them easily.

 

 

Product Features

Saves cost and time in construction

IS 16172:2014 standards compliant

Manufactured from EN8D Material

Kosmo Couplers improve concrete flow 

Minimum 625 Mpa of Ultimate Tensile Strength is achieved 

Available in sizes from 16mm to 40mm

Facilitate a “Greener” and a “Lighter” structure by reducing the consumption of steel

They are designed for connecting Reinforcement bars. These couplers are parallel threaded mechanical splicing system. This system is cost-effective and efficient solution instead of overlapping joints.

We offer parallel threaded couplers that are IS 16172 standard compliant. These couplers are easy and quick to install and saves construction time. These couplers are also best solution to the congestion of the bars. We offer quality threading services on-site, so you can install them easily.

 

 

Product Features

Cost Saving and Time Saving 

IS 16172:2014 standards compliant

Manufactured from EN8D Material

Best alternative to lap splicing

Load Transfer is independent of the grade of concrete

Available in sizes from 16mm to 40mm

Build a “Greener” and a “Lighter” structure by reducing the consumption of steel. 

Upset Rebar Couplers are suitable for joining reinforcement bars end to end. They are an efficient and cost effective alternative for overlapping joints. 

For these type of couplers, the rebar end is first enlarged and then threaded. 
This method avoids reduction in rebar diameter. 

Kosmo Couplers are readily availble for rebar sizes 16 mm to 40 mm. 

 

Build a greener and lighter structure by reducing consumption of steel and lighter structure by reducing consumption of steel.

Rebar couplers  are suitable for joining reinforcement bars end to end. They are an efficient and cost effective alternative for overlapping joints. 

 

Kosmo Tapered Couplers are readily available for rebar sizes 16 mm to 40 mm. 

 

      Advantages of Kosmo Couplers

1. Saves cost by reducing steel wastage
2. Saves time
3. Better UTS than that of parent Rebar
4. Solves problem of bar congestion
5. No Torque wrench required 

 

Build a greener and lighter structure by reducing consumption of steel. 

 Rebar couplers  are suitable for joining reinforcement bars end to end. They are an efficient and cost effective alternative for overlapping joints. Sizes Available
16mm to 40mm

We are doing this business since 2014 with extreme loyalty and honesty. We always put our customer's satisfaction in our top most priority list.

Sizes Available
16mm to 40mm